STM32 Mastery 2026 Live Bootcamp is an intensive, project-driven embedded systems training program designed to transform you into a confident, job-ready embedded engineer. This is not a recorded theory course. This is a live, mentor-guided bootcamp where you build real STM32 projects step-by-step with direct interaction, doubt solving, and real-time guidance. Whether you are: A beginner in embedded systems An engineering student Or someone with basic microcontroller knowledge This bootcamp takes you from fundamentals to advanced project implementation using industry-standard development practices.
Course Timeline:
You will find all the Course Content Of STM32 here
in this lession you will learn aboute Introduction to STM32, STM32 CUBE IDE, schematics, and datasheets
Test
The Test is Based On...
In this Session, you will learn about creating a new STM32 project, LED control - Blink one LED, Blink multiple LEDs, Toggle LEDs with software delay, and LED control using push buttons (switches)
Test
The Test Is Based On...
Controlling LED brightness using PWM
Test
The Test Is Based On...
UART Communication Modes: Polling, DMA, and Interrupt (Tx/Rx Bidirectional)
Test
This module test cir...
In this session, you will learn about STM32 LECTURE 05: IĀ²C Communication
Sending data from one STM32 board to another via SPI & Interfacing external sensors via SPI and exchanging data
In this Lesson Sensor Interfacing
you will learn GSM Module Hardware Setup & AT Commands Testing
How to Send Data to a TCP Server using GSM
HTTPS Communication using GSM Modem | STM32 SIM800 HTTP/HTTPS
How to use MQTT Communication with GSM Modem
How to Make Phone Calls using GSM Modem | SIM800/SIM900