Create Your Own Motorcycle Monitor for the Race Track with Arduino Nano 33 IoT
Make your own motorcycle monitor for the race track with a Nano 33 IoT
If you’re an avid motorcyclist, then you’ve probably heard about the Nano 33 IoT — a powerful, yet tiny microcontroller board that can be used to make a wide variety of projects. As it turns out, the Nano 33 IoT is a great platform for making your own motorcycle monitor for the race track. With a few simple parts, you can build a device that will measure speed, RPMs, and more in real-time while you race! Here’s how it works and how you can make one for yourself.
What You Need
To get started, you’ll need the following items:
- Nano 33 IoT
- SparkFun Pulse Sensor
- SparkFun Micro OLED Breakout Board
- 220 Ohm Resistor
- Arduino IDE
Creating the Circuitry
Once you have all of your components, you can begin constructing the circuit. Start by connecting the 220 Ohm resistor to the Pulse Sensor and then to the Nano 33 IoT’s A0 pin. Next, connect the SparkFun OLED Breakout Board to the Nano 33 IoT’s I2C pins. Once everything is connected, it's time to start writing code.
Writing the Code
Using the Arduino IDE, you can write a program to read the RPM signal from the Pulse Sensor and display it on the OLED display. You can also set up the code to measure the speed of your motorcycle and display it as well. Once you’ve written the code and uploaded it to your Nano 33 IoT, it’s time to take your homemade monitor for a test ride!
Using the Monitor
Now that you’ve created your own motorcycle monitor, you’ll be able to keep track of your performance on the race track. With the monitor, you can monitor your RPMs, speed, and any other data points that you’ve programmed into the monitor. This information can then help you adjust your riding technique to improve your lap times and overall performance.
Conclusion
The Nano 33 IoT is an incredibly powerful and versatile microcontroller board that can be used to create a variety of useful projects. By combining it with the SparkFun Pulse Sensor and OLED Breakout Board, you can easily create your own motorcycle monitor for the race track. With this device, you’ll have all the information you need to take your riding performance to the next level!